Salta al contenuto principale

HP Pavilion dv6000 Wireless Card Replacement

Cosa ti serve

  1. HP Pavilion dv6000 Wireless Card Replacement, Wireless Card: passo 1, immagine 1 di 1
    • Lay the laptop on a flat surface, battery side up.

    • Remove the two screws securing the RAM shield to the lower case.

    • The screws will remain captive within the shield.

    • Lift and remove the RAM shield up from the lower case.

  2. HP Pavilion dv6000 Wireless Card Replacement: passo 2, immagine 1 di 2 HP Pavilion dv6000 Wireless Card Replacement: passo 2, immagine 2 di 2
    • Use a pair of tweezers to disconnect both antennas from their sockets on the wireless card.

    • Be careful to pull on the contacts and not the wires. The crimps used to hold them to the wires are delicate.

  3. HP Pavilion dv6000 Wireless Card Replacement: passo 3, immagine 1 di 1
    • Remove the two 3.7 mm Phillips screws securing the wireless card to the motherboard.

    • Upon removing the Phillips screws that secures the wireless card to the motherboard, the wireless card board should pop up from its top side.

    • Grasp the wireless card and pull it straight out of its socket on the motherboard.

  4. HP Pavilion dv6000 Wireless Card Replacement: passo 4, immagine 1 di 1
    • Wireless card remains.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 5 persone hanno completato questa guida.

Ben Hirsch

Membro da: 10/05/10

3.826 Reputazione

10 Guide realizzate

Team

Cal Poly, Team 21-33, Regan Fall 2010 Membro di Cal Poly, Team 21-33, Regan Fall 2010

CPSU-REGAN-F10S21G33

4 Membri

12 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 6

Tutti i Tempi: 26,661