Introduzione

If your hard drive is not working or you want to add in a larger hard drive, follow this guide.

Remove the two screws from the hard drive shield and lift it off starting at the right side.  The screws will remain in the shield.
  • Remove the two screws from the hard drive shield and lift it off starting at the right side. The screws will remain in the shield.

Aggiungi Commento

Pull the plastic tab attached to the hard drive. The hard drive lifts right out.  Pull gently so you don't damage the contacts.
  • Pull the plastic tab attached to the hard drive. The hard drive lifts right out. Pull gently so you don't damage the contacts.

Aggiungi Commento

  • Now you have your hard drive out!

Aggiungi Commento

  • Gently pull forward the HP adapter from the top of the hard drive.

  • Insert the adapter onto the new SATA hard drive, to be replaced in the laptop.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 14 persone hanno completato questa guida.

Ben Hirsch

Membro da: 05/10/2010

3.607 Reputazione

10 Guide realizzate

Team

Cal Poly, Team 21-33, Regan Fall 2010 Membro di Cal Poly, Team 21-33, Regan Fall 2010

CPSU-REGAN-F10S21G33

4 Membri

10 Guide realizzate

thanks for your help

moyguens - Replica

I was scratching my head when I recvd the new hd w/out the adapter... LOL! thanks

gilaraujog - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 25

Ultimi 30 Giorni: 163

Tutti i Tempi: 34,029