Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Begin removing the bottom cover by sliding the battery removal slider to the right to pop off the top of the cover.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Slide a black spudger under the top of the cover to loosen the clips underneath.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Slide the spudger down the left side of the cover to loosen the clips.
-
After the left side is loose, the rest of the cover should pop off, and you can remove it with your hands.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using a spudger, remove the white and black antenna wires from the WiFi Adapter
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using a Phillips #0 screw driver, remove the two 4mm screws holding the WiFi adapter in place
-
After the screws are removed the WiFi Adapter will raise to a 45º angle.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Pull the WiFi Adapter out of the slot at a 45º angle.
-
Annulla: non ho completato questa guida.
Altre 2 persone hanno completato questa guida.