Introduzione

The case contains all the internal parts of the laptop. It will need to be opened to replace these parts. This guide will serve as a general procedure on how to open up the laptop case in order to perform the other replacement guides.

  1. Unplug laptop  from adapter and all other devices.
    • Unplug laptop from adapter and all other devices.

  2. Flip the laptop over with battery facing you.
    • Flip the laptop over with battery facing you.

    • Slide the battery lock on the right side open.

    • Slide the Battery release latch on the left side.

    • Pull battery out.

    • Remove the two 6.5mm Phillips #1 keyboard screws from bottom of laptop.

    • Push screwdriver through screw hole top pop the keyboard.

    • Make sure the screen is open.

    • Pry up the keyboard.

    • The keyboard is still attached by it's ribbon.

    • Remove keyboard wire by popping latch under blue plastic

    • Using the spudger to lift up on the white tabs

    • Pull horizontally on the blue ribbon to disconnect the cables

    • Remove the five 5.5mm Phillips #1 screws from the case

    • Remove eight 6.5mm Phillips #1 screws from the back cover

    • Starting at a top corner, use the pry tool to split the case.

    • Slowly work around the case, pulling up gently to release the clips.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Team

USF Tampa, Team S11-G2, Cheng Spring 2018 Membro di USF Tampa, Team S11-G2, Cheng Spring 2018

USFT-CHENG-S18S11G2

4 Membri

10 Guide realizzate

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 8

Tutti i Tempi: 76