HP Pavilion 15-b109wm Keyboard Replacement

Introduzione

This replacement guide will show how to replace the keyboard of an HP Pavilion 15-b109wm. This process will take between 10-20 minutes, if done correctly. Remember to take your time and do the steps correctly and gently to avoid parts breakage.

Cosa ti serve

Passo 1 Battery

HP Pavilion 15-b109wm Keyboard Replacement, Battery: passo 1, immagine 1 di 1

Power off the device and disconnect from any power source.

Modifica

Passo 2

Turn the device upside down and ensure the back of the device is facing you.

Modifica

Passo 3

HP Pavilion 15-b109wm Keyboard Replacement: passo 3, immagine 3 di 3

Push both buttons towards one another simultaneously. The battery slightly pops out.

Modifica

Passo 4

HP Pavilion 15-b109wm Keyboard Replacement: passo 4, immagine 3 di 3

Pull out the battery from the device's battery slot.

Modifica

Passo 5 Keyboard

HP Pavilion 15-b109wm Keyboard Replacement, Keyboard: passo 5, immagine 1 di 2

HP Pavilion 15-b109wm Keyboard Replacement, Keyboard: passo 5, immagine 2 di 2

Use JIS #1 screwdriver to remove the eleven 6 mm screws.

Modifica

Passo 6

Locate the two screw holes that allow access to removing the keyboard.
There is a keyboard sign beside both keyboard access holes.

Modifica

Passo 7

Attrezzo utilizzato in questo passaggio:

Heavy-Duty Spudger

$4.99

Compra

Turn the device onto its side.
Using a heavy duty spudger, gently disengage the keyboard.

Modifica

Passo 8

Using a plastic opening tool, release the keyboard clips.

Modifica

Passo 9

Tilt the keyboard to expose the Zero Insertion Force connector to which the keyboard cable is attached.

Modifica

Passo 10

HP Pavilion 15-b109wm Keyboard Replacement: passo 10, immagine 3 di 3

Disconnect the keyboard cable from the motherboard by detaching the Zero Insertion Force connector.
To detach the connector, release by lifting the black plastic tab up.