Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using the plastic opening tool, remove the top rubber feet on the back panel as it hides one of the screws we will be removing.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using a PH0 screwdriver, unscrew the ten 4.4mm Phillips head screws located on the back panel.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using the plastic opening tool, remove the back cover of the laptop.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using a PH0 screwdriver, unscrew the two 3.8mm PH0 Phillips head screws that hold the battery in place.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Carefully disconnect the cable connecting the top of the battery and remove the battery.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
The network card is located at the top left corner of the motherboard.
-
Unscrew the 4.4mm PH0 Phillips screw at the top of the network card.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using the spudger, remove the two gold pins at the top of the network card.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Lift up the network card and remove it from the motherboard connector.
-