Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Introduzione

Unplug your device from any power source and turn off your laptop before beginning.

  1. Use the spudger to pry off the two rubber feet near the hinge of the laptop. This will reveal two hidden 9mm screws. You must remove eleven screws.
    • Use the spudger to pry off the two rubber feet near the hinge of the laptop. This will reveal two hidden 9mm screws.

    • You must remove eleven screws.

    • Four 9mm screws with the PH0 screwdriver.

    • Seven 6mm screws with the PH0 screwdriver.

  2. Use the spudger to pry the corners of the laptop near the display hinges. Pry around the seam of the laptop with the plastic opening tool until the backing begins to pull apart. When you lift the bottom cover, there is a cable connected between the motherboard and the bottom cover. Be careful not to pull the cable loose!
    • Use the spudger to pry the corners of the laptop near the display hinges.

    • Pry around the seam of the laptop with the plastic opening tool until the backing begins to pull apart.

    • When you lift the bottom cover, there is a cable connected between the motherboard and the bottom cover. Be careful not to pull the cable loose!

  3. Kit per Nintendo Switch

    Una soluzione rapida per tornare in gioco

    Acquista Kit per Switch

    Kit per Nintendo Switch

    Una soluzione rapida per tornare in gioco

    Acquista Kit per Switch
  4. Use the plastic opening tool to lift the white tab up at the connection. Pull the cable outwards.
    • Use the plastic opening tool to lift the white tab up at the connection.

    • Pull the cable outwards.

  5. Remove the two 3mm screws with the PH0 screwdriver.
    • Remove the two 3mm screws with the PH0 screwdriver.

  6. Use your fingernails to slowly loosen the fan connection cable. After the cable is slightly pulled from the connection, grab the cable and pull it outwards.
    • Use your fingernails to slowly loosen the fan connection cable.

    • After the cable is slightly pulled from the connection, grab the cable and pull it outwards.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 6 persone hanno completato questa guida.

Natalie

Membro da: 22/01/2015

877 Reputazione

4 Guide realizzate

Team

Cal Poly, Team 19-9, Maness Winter 2015 Membro di Cal Poly, Team 19-9, Maness Winter 2015

CPSU-MANESS-W15S19G9

4 Membri

8 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 27

Tutti i Tempi: 2,083