Introduzione

The front panel door may not close properly after repeated use. This guide will show how to remove the front panel door.

Parti

Nessuna parte richiesta.

Open the front panel door by pulling forward on the slot located on the front-left side of the printer.
  • Open the front panel door by pulling forward on the slot located on the front-left side of the printer.

Aggiungi Commento

Insert the plastic opening tool into the right socket connecting the front panel door to the hinge guide.
  • Insert the plastic opening tool into the right socket connecting the front panel door to the hinge guide.

  • Pry the socket open, lifting the door hinge guide out of place.

Aggiungi Commento

  • Pull the door-hinge guide to the right to detach its left socket.

  • Lift the door-hinge guide upward and away from the front panel door.

Aggiungi Commento

  • Grab the front panel door close to its hinge on the right side.

  • Pull the front panel door away from the printer toward you.

  • Extra force may be required to pull the door from its hinge.

Aggiungi Commento

  • Grab the front panel door close to its two hinges on the left side.

  • Pull the front panel door away from the printer toward you.

  • Extra force may be required to pull the door from its hinges.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Maegan Betz

Membro da: 18/04/2018

176 Reputazione

1 Guida realizzata

Team

Cal Poly, Team S16-G4, Livingston Spring 2018 Membro di Cal Poly, Team S16-G4, Livingston Spring 2018

CPSU-LIVINGSTON-S18S16G4

4 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 4

Ultimi 7 Giorni: 15

Ultimi 30 Giorni: 59

Tutti i Tempi: 227