Salta al contenuto principale

HP Officejet 4630 Scanner Head Replacement

Cosa ti serve

  1. HP Officejet 4630 Scanner Head Replacement, LCD Display: passo 1, immagine 1 di 3 HP Officejet 4630 Scanner Head Replacement, LCD Display: passo 1, immagine 2 di 3 HP Officejet 4630 Scanner Head Replacement, LCD Display: passo 1, immagine 3 di 3
    • There is a hidden screw underneath the model sticker on the front panel.

    • Peel the model sticker off the cover.

    • This will expose the T10 screw securing the panel.

  2. HP Officejet 4630 Scanner Head Replacement: passo 2, immagine 1 di 3 HP Officejet 4630 Scanner Head Replacement: passo 2, immagine 2 di 3 HP Officejet 4630 Scanner Head Replacement: passo 2, immagine 3 di 3
    • Remove the single 12mm-T10 screw securing the front panel to the printer body.

    • Loosen the panel cover from the printer body.

    • There is a ribbon cable connected to the backside of the cover. Disconnect the cable before separating the panel completely.

  3. HP Officejet 4630 Scanner Head Replacement: passo 3, immagine 1 di 3 HP Officejet 4630 Scanner Head Replacement: passo 3, immagine 2 di 3 HP Officejet 4630 Scanner Head Replacement: passo 3, immagine 3 di 3
    • Gently remove the No-Fuss ribbon cable from the front panel.

  4. HP Officejet 4630 Scanner Head Replacement: passo 4, immagine 1 di 3 HP Officejet 4630 Scanner Head Replacement: passo 4, immagine 2 di 3 HP Officejet 4630 Scanner Head Replacement: passo 4, immagine 3 di 3
    • Remove the seven 8mm screws using the Torx T6 screwdriver.

    • Remove the motherboard from the front-panel housing.

    • The LCD display is on the opposite side.

  5. HP Officejet 4630 Scanner Head Replacement, Power Supply: passo 5, immagine 1 di 3 HP Officejet 4630 Scanner Head Replacement, Power Supply: passo 5, immagine 2 di 3 HP Officejet 4630 Scanner Head Replacement, Power Supply: passo 5, immagine 3 di 3
    • Lift the hood of the printer.

  6. HP Officejet 4630 Scanner Head Replacement: passo 6, immagine 1 di 3 HP Officejet 4630 Scanner Head Replacement: passo 6, immagine 2 di 3 HP Officejet 4630 Scanner Head Replacement: passo 6, immagine 3 di 3
    • Remove the two T10 11mm screws.

  7. HP Officejet 4630 Scanner Head Replacement: passo 7, immagine 1 di 3 HP Officejet 4630 Scanner Head Replacement: passo 7, immagine 2 di 3 HP Officejet 4630 Scanner Head Replacement: passo 7, immagine 3 di 3
    • Remove the panels covering the power brick and cord.

  8. HP Officejet 4630 Scanner Head Replacement: passo 8, immagine 1 di 2 HP Officejet 4630 Scanner Head Replacement: passo 8, immagine 2 di 2
    • Remove the cord from the power supply.

  9. HP Officejet 4630 Scanner Head Replacement: passo 9, immagine 1 di 3 HP Officejet 4630 Scanner Head Replacement: passo 9, immagine 2 di 3 HP Officejet 4630 Scanner Head Replacement: passo 9, immagine 3 di 3
    • Slide the power supply out from the chassis.

    • The power supply is still attached; don't pull too quickly.

  10. HP Officejet 4630 Scanner Head Replacement: passo 10, immagine 1 di 1
    • Remove final cable from power supply.

  11. HP Officejet 4630 Scanner Head Replacement, Scanner Head: passo 11, immagine 1 di 1
    • Remove eight T10 1mm screws from the top hood of the printer.

  12. HP Officejet 4630 Scanner Head Replacement: passo 12, immagine 1 di 3 HP Officejet 4630 Scanner Head Replacement: passo 12, immagine 2 di 3 HP Officejet 4630 Scanner Head Replacement: passo 12, immagine 3 di 3
    • Use the nylon spudger to pry the tab.

    • Lift up the entire panel.

  13. HP Officejet 4630 Scanner Head Replacement: passo 13, immagine 1 di 3 HP Officejet 4630 Scanner Head Replacement: passo 13, immagine 2 di 3 HP Officejet 4630 Scanner Head Replacement: passo 13, immagine 3 di 3
    • Lift and flip the entire panel.

    • Be aware of the scanner head attached to the panel.

  14. HP Officejet 4630 Scanner Head Replacement: passo 14, immagine 1 di 3 HP Officejet 4630 Scanner Head Replacement: passo 14, immagine 2 di 3 HP Officejet 4630 Scanner Head Replacement: passo 14, immagine 3 di 3
    • Start with the scanner head in place.

    • Unwind the ribbon from the track.

    • Detach ribbon completely.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Maya Willis

Membro da: 01/24/18

415 Reputazione

3 Guide realizzate

Team

Cal Poly, Team S18-G3, Livingston Winter 2018 Membro di Cal Poly, Team S18-G3, Livingston Winter 2018

CPSU-LIVINGSTON-W18S18G3

4 Membri

18 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 12

Tutti i Tempi: 1,394