Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Open the cartridge access door by putting one hand on the grooves of each side and pulling up.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using the 2.0 mm hex screwdriver, remove the 14 mm hex screw that binds the front cover to the printer body by turning the screw counterclockwise.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Release the front panel from its internal hooks by applying a little force and sliding the front panel to the right.
-
Push the panel upward to remove it from the printer.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the connector that is attached to the screen's circuit board by pinching the blue part of the connector with two fingers and pulling it away from the circuit board.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using the Torx T6 hex screwdriver, remove the 7.0mm screw that binds the front cover to the printer body by turning the screw counterclockwise.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the connector that is attached to the screen's circuit board by pinching the blue part of the connector with two fingers and pulling it away from button circuit board.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Pop the button off from the black cover by using your finger tip to bring it up.
-
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.
5 Commenti
Where can I purchase the replacement Power Button? What is the part number?
Bonjour,
Ou peut on acheter l'écran tactile HP Officejet 4650 ???