HP OfficeJet 4650 Power Button Replacement

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Introduzione

The power button is what allows the printer to turn on. If the power button is malfunctioning, the HP OfficeJet 4650 will not function. This guide will show you how to replace the power button.

Cosa ti serve

Passo 1 Power Button

HP OfficeJet 4650 Power Button Replacement, Power Button: passo 1, immagine 1 di 3

HP OfficeJet 4650 Power Button Replacement, Power Button: passo 1, immagine 2 di 3

HP OfficeJet 4650 Power Button Replacement, Power Button: passo 1, immagine 3 di 3

Open the cartridge access door by putting one hand on the grooves of each side and pulling up.

Traduci

Passo 2

Using the 2.0 mm hex screwdriver, remove the 14 mm hex screw that binds the front cover to the printer body by turning the screw counterclockwise.

Traduci

Passo 3

HP OfficeJet 4650 Power Button Replacement: passo 3, immagine 3 di 3

Release the front panel from its internal hooks by applying a little force and sliding the front panel to the right.
Push the panel upward to remove it from the printer.
There is a connector attached to the back of the panel. Flip the front cover towards you gently and proceed to the next step.

Traduci

Passo 4

HP OfficeJet 4650 Power Button Replacement: passo 4, immagine 3 di 3

Remove the connector that is attached to the screen's circuit board by pinching the blue part of the connector with two fingers and pulling it away from the circuit board.

Traduci

Passo 5

HP OfficeJet 4650 Power Button Replacement: passo 5, immagine 3 di 3

Using the Torx T6 hex screwdriver, remove the 7.0mm screw that binds the front cover to the printer body by turning the screw counterclockwise.

Traduci

Passo 6

HP OfficeJet 4650 Power Button Replacement: passo 6, immagine 3 di 3

Remove the connector that is attached to the screen's circuit board by pinching the blue part of the connector with two fingers and pulling it away from button circuit board.

Traduci