Salta al contenuto principale

Introduzione

The Real Time Clock (RTC) Battery helps to retain important BIOS settings such as system time, date, and BIOS configuration while the laptop is turned off or when the main battery is removed.

Parti

Nessuna parte specificata.

  1. Before beginning, make sure that your computer is turned off and all external power cords are disconnected.
    • Before beginning, make sure that your computer is turned off and all external power cords are disconnected.

    • Close the laptop and turn it over, so that the underside is up and the silver battery bay is facing towards you.

  2. Locate the battery locking latch on the bottom right corner and slide it inward to unlock the battery. Locate the battery release latch on the bottom left and slide it inward. Pull the battery towards you to remove it from the laptop.
    • Locate the battery locking latch on the bottom right corner and slide it inward to unlock the battery.

    • Locate the battery release latch on the bottom left and slide it inward.

    • Pull the battery towards you to remove it from the laptop.

  3. Batterie per PC portatili

    Una soluzione semplice per un grande aumento di potenza.

    Acquista ora

    Batterie per PC portatili

    Una soluzione semplice per un grande aumento di potenza.

    Acquista ora
  4. Locate the service access cover release lever and slide it to the right. While holding the lever to the right, lift up the laptop's bottom cover gently and remove the cover from the laptop. While holding the lever to the right, lift up the laptop's bottom cover gently and remove the cover from the laptop.
    • Locate the service access cover release lever and slide it to the right.

    • While holding the lever to the right, lift up the laptop's bottom cover gently and remove the cover from the laptop.

  5. If you are performing any installations after the battery, orient the computer so that the underside is up, and the battery port is facing away from you.
    • If you are performing any installations after the battery, orient the computer so that the underside is up, and the battery port is facing away from you.

  6. Locate the RTC battery, a thin cylinder near the bottom left corner of the computer. Locate the RTC Battery Cable, connected to the RTC Battery. Pull the RTC battery cable to to the left, out of its socket.
    • Locate the RTC battery, a thin cylinder near the bottom left corner of the computer.

    • Locate the RTC Battery Cable, connected to the RTC Battery.

    • Pull the RTC battery cable to to the left, out of its socket.

  7. Gently pry the RTC battery upwards with the plastic opening tool. Remove RTC battery by lifting it away from the computer.
    • Gently pry the RTC battery upwards with the plastic opening tool.

    • Remove RTC battery by lifting it away from the computer.

    • The RTC battery is attached with double sided tape.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Alek Linquist

Membro da: 05/10/2012

108 Reputazione

2 Guide realizzate

Team

Cal Poly, Team 3-23, Amido Fall 2012 Membro di Cal Poly, Team 3-23, Amido Fall 2012

CPSU-AMIDO-F12S3G23

4 Membri

6 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 3

Tutti i Tempi: 954