Aggiusta la tua roba

Diritto alla Riparazione

Store

HP Mini 210-2070NR Battery and Service Access Cover Replacement

Scritto Da: Sean Kuster (e 9 altri collaboratori)
  • Commenti: 0
  • Preferiti: 2
  • Completamenti: 1

Difficoltà

Molto facile

Passi

4

Tempo Necessario

5 minuti

Sezioni

1

Contrassegni

2

Markup Mishap

Inconveniente Markup

Questa guida ha bisogno di markup migliori. Contribuisci correggendoli o con annotazioni sui markup.

Slice and Dice

Fallo a Fettine

I passaggi in questa guida dovrebbero essere suddivisi e trasformati in una serie di guide prerequisite.

Introduzione

Use this guide to remove the battery and the back cover of your laptop in order to repair or install new parts.

  1. Before beginning, make sure that your computer is turned off and all external power cords are disconnected.

    • Before beginning, make sure that your computer is turned off and all external power cords are disconnected.

    • Close the laptop and turn it over so that the underside is up and the silver battery bay is facing towards you.

    Modifica

  2. The battery locking latch is on the bottom right corner, slide it inward to unlock the battery. Slide the battery release latch inwards. Pull the battery towards you to remove it.

    • The battery locking latch is on the bottom right corner, slide it inward to unlock the battery.

    • Slide the battery release latch inwards.

    • Pull the battery towards you to remove it.

    Modifica

  4. Slide the service access cover release lever to the right. While holding the lever to the right, lift up the laptop's bottom cover gently and remove the cover. While holding the lever to the right, lift up the laptop's bottom cover gently and remove the cover.

    • Slide the service access cover release lever to the right.

    • While holding the lever to the right, lift up the laptop's bottom cover gently and remove the cover.

    Modifica

  5. Orientate the computer as shown in the picture.

    • Orientate the computer as shown in the picture.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Autore

con 9 altri collaboratori

Sean Kuster

Membro da: 05/10/2012

82 Reputazione

3 Guide realizzate

Distintivi: 7

+4 altri distintivi

Team

Cal Poly, Team 3-23, Amido Fall 2012 Membro di Cal Poly, Team 3-23, Amido Fall 2012

CPSU-AMIDO-F12S3G23

4 Membri

6 Guide realizzate

0 Commenti

Aggiungi un commento

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 1,335