Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
-
Con il case chiuso, posiziona il lato superiore del Mini 1000 verso il basso su una superficie piana.
-
Spingi entrambi i ganci di rilascio della batteria l'uno verso l'altro.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the following two screws:
-
One 6 mm Phillips screw
-
One 4 mm Phillips screw
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
While pushing through the opening with one hand, grasp the left upper edge with the other hand and slightly pull the keyboard towards you.
-
Once an opening has been established, grasp the keyboard and slowly lift it upwards along the upper perimeter of the top edge.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Lift the keyboard out of the upper case, minding the cable that is still connecting it to the motherboard.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use your fingernail or the flat end of a spudger to flip up the retaining flap on the keyboard cable ZIF socket.
-
Pull the cable out of its socket and remove the keyboard.
-
Annulla: non ho completato questa guida.
Altre 5 persone hanno completato questa guida.