HP Mini 1000 Camera Board Cable Replacement

Introduzione

This guide is an internal prereq only.

Use the sharp end of a spudger to flip up the plastic flap that rests on top of the camera board cable ZIF socket.

Use your fingernail or the sharp end of a spudger to flip up the retaining flap on the camera board cable ZIF socket.
Be sure you are prying up on the retaining flap, not the socket itself.
Pull the camera board ribbon cable out of its socket.

Conclusione

To reassemble your device, follow these instructions in reverse order.

694.561 Reputazione

1.203 Guide realizzate