Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

HP Media Center 876x Optical Drive Replacement

Cosa ti serve

  1. HP Media Center 876x Optical Drive Replacement, Side Panel: passo 1, immagine 1 di 2 HP Media Center 876x Optical Drive Replacement, Side Panel: passo 1, immagine 2 di 2
    • Remove the two (9 mm) hand screws on the back panel.

  2. HP Media Center 876x Optical Drive Replacement: passo 2, immagine 1 di 3 HP Media Center 876x Optical Drive Replacement: passo 2, immagine 2 di 3 HP Media Center 876x Optical Drive Replacement: passo 2, immagine 3 di 3
    • Place the tower on its side.

    • Slide the side panel horizontally to detach, and pull upward to remove.

  3. HP Media Center 876x Optical Drive Replacement, Front Cover: passo 3, immagine 1 di 2 HP Media Center 876x Optical Drive Replacement, Front Cover: passo 3, immagine 2 di 2
    • Orient the tower vertically.

    • Using the #0 Phillips head screwdriver, unscrew and remove the two (5 mm) screws that fasten the remaining side panel to the tower.

    • Slide the side panel out of its notches, and pull it gently off of the tower.

  4. HP Media Center 876x Optical Drive Replacement: passo 4, immagine 1 di 1
    • Gently move the tower so that it is in the horizontal orientation.

    • Press down the black tabs (proximal to you) that fasten the front panel to the tower.

    • Press down on the distal, black tabs (symmetric with respect to the previous tabs).

    • Pull front panel forward slightly.

  5. HP Media Center 876x Optical Drive Replacement: passo 5, immagine 1 di 2 HP Media Center 876x Optical Drive Replacement: passo 5, immagine 2 di 2
    • Orient the tower vertically.

    • The front panel will come off in a hinge-like fashion, exposing the drives underneath.

  6. HP Media Center 876x Optical Drive Replacement, Optical Drive: passo 6, immagine 1 di 3 HP Media Center 876x Optical Drive Replacement, Optical Drive: passo 6, immagine 2 di 3 HP Media Center 876x Optical Drive Replacement, Optical Drive: passo 6, immagine 3 di 3
    • Identify the optical drive.

    • Pull the molex connectors out of the posterior end of the optical drive.

  7. HP Media Center 876x Optical Drive Replacement: passo 7, immagine 1 di 3 HP Media Center 876x Optical Drive Replacement: passo 7, immagine 2 di 3 HP Media Center 876x Optical Drive Replacement: passo 7, immagine 3 di 3
    • Pull the "ribbon cable" out of the posterior end of the optical drive.

  8. HP Media Center 876x Optical Drive Replacement: passo 8, immagine 1 di 3 HP Media Center 876x Optical Drive Replacement: passo 8, immagine 2 di 3 HP Media Center 876x Optical Drive Replacement: passo 8, immagine 3 di 3
    • Using the #0 Phillips head screwdriver, unscrew the two (5 mm) screws that fasten the optical drive into its port.

    • Gently pull the optical drive through the frontal cavity.

  9. HP Media Center 876x Optical Drive Replacement: passo 9, immagine 1 di 2 HP Media Center 876x Optical Drive Replacement: passo 9, immagine 2 di 2
    • Remove the optical drive completely from its port.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Team

Clemson, Team 6-1, Benson Spring 2014 Membro di Clemson, Team 6-1, Benson Spring 2014

CLEM-BENSON-S14S6G1

3 Membri

15 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 358