Aggiusta la tua roba Comunità Store

HP G62 347NR Keyboard Replacement

Introduzione

This guide will show users how to replace the keyboard for an HPG62-347NR laptop. You will need a Phillips #1 screwdriver and a prying tool.

Cosa ti serve

  1. HP G62 347NR Keyboard Replacement, Keyboard: passo 1, immagine 1 di 1

    • Make sure the device is turned off before removing the battery to avoid loss or corruption of files.

    • Turn the device over so the bottom is facing up.

    • Slide the battery release to the left until you hear a click.

    • Once you hear a click, the battery will have been released from the battery compartment.

    Traduci

  2. HP G62 347NR Keyboard Replacement: passo 2, immagine 1 di 1

    • Remove the battery, carefully, from the compartment.

    Traduci

  3. HP G62 347NR Keyboard Replacement: passo 3, immagine 1 di 2 HP G62 347NR Keyboard Replacement: passo 3, immagine 2 di 2

    • Find the hard drive compartment with two Phillips head screws.

    • Use the PH1 screwdriver to loosen and remove both screws.

    • Gently remove the hard drive compartment.

    Traduci

  5. HP G62 347NR Keyboard Replacement: passo 4, immagine 1 di 2 HP G62 347NR Keyboard Replacement: passo 4, immagine 2 di 2

    • Locate the three Phillips head screws on the compartment with the wifi and keyboard logos.

    • Using the Phillips #1 screwdriver, remove the three screws.

    Traduci

  6. HP G62 347NR Keyboard Replacement: passo 5, immagine 1 di 2 HP G62 347NR Keyboard Replacement: passo 5, immagine 2 di 2

    • Locate the two keyboard logos on back of the computer.

    • Find the Phillips head screws in the hole next to the logo.

    • Remove the two screws using a Phillips #1 screwdriver.

    Traduci

  7. HP G62 347NR Keyboard Replacement: passo 6, immagine 1 di 2 HP G62 347NR Keyboard Replacement: passo 6, immagine 2 di 2

    • In the battery compartment, locate the three keyboard logos.

    • Find the Phillips head screws next to each logo.

    • Remove the three screws using the Phillips #1 screwdriver.

    Traduci

  8. HP G62 347NR Keyboard Replacement: passo 7, immagine 1 di 2 HP G62 347NR Keyboard Replacement: passo 7, immagine 2 di 2

    • Place the plastic opening tool between the keyboard and the motherboard.

    • Gently pry the entire keyboard up and away from the laptop's motherboard.

    • Once you have part of the keyboard separated, run your fingers around the edge of the keyboard to separate the entire thing.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 3 persone hanno completato questa guida.

Autore

con 2 altri collaboratori

McKenzi Morris

Membro da: 10/10/16

511 Reputazione

3 Guide realizzate

Distintivi: 9

+6 altri distintivi

Team

Texas Tech, Team 6-1, Bennett Fall 2016 Membro di Texas Tech, Team 6-1, Bennett Fall 2016

TTU-BENNETT-F16S6G1

3 Membri

3 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 10

Tutti i Tempi: 2,735