Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use the plastic opening tool to remove the gray rubber pads on the bottom of the laptop. For our device we only needed to remove the two at the top.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use a Torx T5 screwdriver to remove the six 5.1 mm screws.
-
Use a JIS #1 screwdriver to remove the two 7.2mm screws.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use a plastic opening tool to pry open the case. Go slowly around the edge. You will hear popping noises, such are due to popping open the small joints that keep the cover attached.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use a JIS #1 screwdriver to remove the six 4.7 mm screws.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use tweezers to disconnect the battery from the motherboard.
-
Annulla: non ho completato questa guida.
Altre 7 persone hanno completato questa guida.
3 Commenti
Thank you!!!! This made it sooooo easy to replace my battery!
Excellent guide, many thanks for posting it.