Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.
Introduzione
The motherboard can wear out over time. This guide will show you how to replace the motherboard.
Cosa ti serve
-
-
Pry off the 2 rear rubber pads (closest to the laptop hinge) using the plastic opening tool to reveal two screws.
-
Remove the 2 anti-tamper proof covers using the spudger to reveal two screws.
-
-
-
-
Remove the three 4mm screws using the Phillips #0 screwdriver from the device fan.
-
-
-
Remove the five 4mm screws with the Phillips #0 screwdriver.
-
Remove one 3mm screw with the Phillips #00 screwdriver.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulla: non ho completato questa guida.
Altre 2 persone hanno completato questa guida.