Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.
Introduzione
The fan can become jammed with debris or stop working over time, causing the device to overheat.
Cosa ti serve
-
-
Pry off the 2 rear rubber pads (closest to the laptop hinge) using the plastic opening tool to reveal two screws.
-
Remove the 2 anti-tamper proof covers using the spudger to reveal two screws.
-
-
-
-
Remove the three 4mm screws using the Phillips #0 screwdriver from the device fan.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.