Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Find the battery removal slider.
-
Slide it across while simultaneously popping out and removing the device's battery.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the five marked screws found under the battery using a philips head screwdriver.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the small panel on the back by prying it off. This should reveal the hard drive.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Gently pry off the cover to release the cable.
-
Slowly lift the hard drive out and away from the device.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the screws highlighted in red
-
Pry off with prying tool the lower two grip pads highlighted in orange
-
Remove the two additional screws underneath the lower grip pads
-
Remove the large back panel to reveal the inner workings
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Locate fan
-
Gently remove tape that hold the heatsink and fan together
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Loosen the four screws on the heat sink indicated in picture
-
Remove the heatsink
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Gently disconnect the wire connecting the fan to the motherboard
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove screws indicated in photo.
-
Remove fan
-
Annulla: non ho completato questa guida.
Altre 6 persone hanno completato questa guida.