Introduzione

Reader will be able to successfully replace their Wi-Fi card in the device. A basic understanding of simple tools such as a screwdriver is needed. Any form of electricity must be removed from device, including the charging cable and battery.

Parti

Flip the device upside-down so that its bottom is facing up.
  • Flip the device upside-down so that its bottom is facing up.

Aggiungi Commento

Push the lever underneath the battery to the left as shown in the picture.
  • Push the lever underneath the battery to the left as shown in the picture.

Aggiungi Commento

  • Lift the battery up out of its socket.

Aggiungi Commento

  • After removing the battery, remove the circled screw.

Aggiungi Commento

  • Remove the back cover.

Aggiungi Commento

  • With the back cover removed, locate the Wi-Fi card which is positioned next to the Beats logo.

Aggiungi Commento

  • Carefully remove gold-headed, black wires from Wi-Fi card with tweezers.

Aggiungi Commento

  • After removing wires, remove circled screws from card.

  • Note: Laptop shown only has one screw holding in Wi-Fi card. Some models may have both.

Aggiungi Commento

  • Wi-Fi card will raise out of device when screw is removed.

  • Gently pull card to the right to remove from device.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

dylananthony

Membro da: 20/10/2016

507 Reputazione

3 Guide realizzate

Team

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 5

Tutti i Tempi: 39