Introduzione

This guide will show you how to replace the headphone jack for the HP Envy TouchSmart 4-1216dx. Before removing the jack, the Back Panel and Fan of the device must be removed.

Parti

Nessuna parte richiesta.

  1. Remove the thirteen Phillips #0 screws.
    • Remove the thirteen Phillips #0 screws.

    Aggiungi Commento

  2. Pull the panel up and off to remove from the laptop.
    • Pull the panel up and off to remove from the laptop.

    Aggiungi Commento

    • Unplug the fan from the motherboard.

    Aggiungi Commento

    • Remove the four Phillips #0 screws holding in the fan.

    • Pull out the fan.

    Aggiungi Commento

    • Unplug bus from motherboard

    Aggiungi Commento

    • Remove the two Phillips #0 screws that hold the headphone jack to the laptop.

    • Pull out to remove.

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 53