Introduzione

This guide will help you in replacing the touchpad on your HP Envy Sleekbook m6-k010dx. Make sure to turn the device off before doing anything.

Parti

Nessuna parte richiesta.

  1. Remove the four 9mm Phillips #00 screws.
    • Remove the four 9mm Phillips #00 screws.

    • Remove the eight 9mm Phillips #00 screws.

    Aggiungi Commento

  2. Use the plastic opening tool and your hands to remove the bottom cover.
    • Use the plastic opening tool and your hands to remove the bottom cover.

    Aggiungi Commento

    • Disconnect the battery power cable from the motherboard.

    • Remove the six 6mm Phillips #00 screws from the battery.

    Aggiungi Commento

    • Lift the battery out of the laptop.

    Aggiungi Commento

    • Lift the white tab on the ZIF connector to unlock the ribbon cable.

    • Pull the ribbon cable out of the ZIF connector.

    Aggiungi Commento

    • Remove the seven 3mm Phillips #00 screws from the trackpad.

    Aggiungi Commento

    • Use the plastic opening tool to lift the touchpad up and pull out to remove.

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

codi whittaker

Membro da: 14/02/2018

433 Reputazione

3 Guide realizzate

Team

USF Tampa, Team S1-G4, Nance Spring 2018 Membro di USF Tampa, Team S1-G4, Nance Spring 2018

USFT-NANCE-S18S1G4

4 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 2

Tutti i Tempi: 84