Introduzione

If your computer turns on but nothing is displayed on the LCD, it might be time to replace it. This guide will walk you through each step.

Parti

Nessuna parte richiesta.

  1. Remove the four 9mm Phillips #00 screws.
    • Remove the four 9mm Phillips #00 screws.

    • Remove the eight 9mm Phillips #00 screws.

  2. Use the plastic opening tool and your hands to remove the bottom cover.
    • Use the plastic opening tool and your hands to remove the bottom cover.

    • Disconnect the battery power cable from the motherboard.

    • Remove the six 6mm Phillips #00 screws from the battery.

    • Lift the battery out of the laptop.

    • Remove the stickers from the bottom left and right corner of the device with a plastic opening tool.

    • Remove the two 2.5mm Phillips #00 screws found underneath the previously removed stickers.

    • Use the plastic opening tool to pry the bezel free from the LCD housing.

    • Remove the four 2.5mm Phillips #00 screws located in each corner of the LCD screen.

    • Use the plastic opening tool to remove the LCD screen from its housing.

    • Lay the LCD screen flat on the keyboard.

    • Disconnect the cable which connects the LCD to the motherboard.

    • Pul the LCD screen out.

Conclusione

To reassemble your device, follow these instructions in reverse order.

codi whittaker

Membro da: 14/02/2018

433 Reputazione

3 Guide realizzate

Team

USF Tampa, Team S1-G4, Nance Spring 2018 Membro di USF Tampa, Team S1-G4, Nance Spring 2018

USFT-NANCE-S18S1G4

4 Membri

5 Guide realizzate

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 4

Tutti i Tempi: 110