Introduzione

This guide is to help you replace your fan on the HP Envy Sleekbook m6-k010dx.

Parti

Nessuna parte richiesta.

  1. Remove the four 9mm Phillips #00 screws.
    • Remove the four 9mm Phillips #00 screws.

    • Remove the eight 9mm Phillips #00 screws.

  2. Use the plastic opening tool and your hands to remove the bottom cover. Use the plastic opening tool and your hands to remove the bottom cover.
    • Use the plastic opening tool and your hands to remove the bottom cover.

  3. Disconnect the battery power cable from the motherboard. Remove the six 6mm Phillips #00 screws from the battery.
    • Disconnect the battery power cable from the motherboard.

    • Remove the six 6mm Phillips #00 screws from the battery.

  4. Spedizione gratuita per tutti gli ordini superiori a 100 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio
  5. Lift the battery out of the laptop. Lift the battery out of the laptop.
    • Lift the battery out of the laptop.

  6. Remove two 3mm Phillips #00 screws from the fan.
    • Remove two 3mm Phillips #00 screws from the fan.

  7. Disconnect the fan cable by pulling it out of the motherboard socket. Disconnect the fan cable by pulling it out of the motherboard socket.
    • Disconnect the fan cable by pulling it out of the motherboard socket.

  8. Lift the fan upwards to remove it from the computer.
    • Lift the fan upwards to remove it from the computer.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Ana Novo

Membro da: 14/02/2018

305 Reputazione

2 Guide realizzate

Team

USF Tampa, Team S1-G4, Nance Spring 2018 Membro di USF Tampa, Team S1-G4, Nance Spring 2018

USFT-NANCE-S18S1G4

4 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 15

Tutti i Tempi: 146