Salta al contenuto principale

HP Envy 5660 Printhead Replacement

Cosa ti serve

  1. HP Envy 5660 Printhead Replacement, Printhead: passo 1, immagine 1 di 1
    • Open the printer so that the underside of the scanner is showing.

  2. HP Envy 5660 Printhead Replacement: passo 2, immagine 1 di 1
    • Unscrew the black 11.5 mm screw closest to the front right corner using a T10 screw bit.

  3. HP Envy 5660 Printhead Replacement: passo 3, immagine 1 di 1
    • Remove right side of the printer using a plastic opening tool or metal spudger.

  4. HP Envy 5660 Printhead Replacement: passo 4, immagine 1 di 1
    • Remove spring from the side of the print head rail using a metal spudger.

  5. HP Envy 5660 Printhead Replacement: passo 5, immagine 1 di 2 HP Envy 5660 Printhead Replacement: passo 5, immagine 2 di 2
    • Push the metal rail the print head rests on inwards to remove it from its bearings.

  6. HP Envy 5660 Printhead Replacement: passo 6, immagine 1 di 1
    • Remove the belt from the back of the print head using a metal spudger.

  7. HP Envy 5660 Printhead Replacement: passo 7, immagine 1 di 1
    • Remove the print head from the metal rail by sliding it off the rail.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Ryan Steakley

Membro da: 01/23/18

781 Reputazione

5 Guide realizzate

Team

Cal Poly, Team S1-G6, Livingston Winter 2018 Membro di Cal Poly, Team S1-G6, Livingston Winter 2018

CPSU-LIVINGSTON-W18S1G6

4 Membri

10 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 3

Ultimi 7 Giorni: 12

Ultimi 30 Giorni: 50

Tutti i Tempi: 4,860