Introduzione

The print head of the HP Envy 5660 is the piece that puts the ink onto the paper inserted into the printer. This guide will go over the replacement of the print head.

Parti

Nessuna parte richiesta.

  1. Open the printer so that the underside of the scanner is showing.
    • Open the printer so that the underside of the scanner is showing.

  2. Unscrew the black 11.5 mm screw closest to the front right corner using a T10 screw bit.
    • Unscrew the black 11.5 mm screw closest to the front right corner using a T10 screw bit.

  3. Remove right side of the printer using a plastic opening tool or metal spudger.
    • Remove right side of the printer using a plastic opening tool or metal spudger.

  4. Spedizione gratuita per tutti gli ordini superiori a 100 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio
  5. Remove spring from the side of the print head rail using a metal spudger.
    • Remove spring from the side of the print head rail using a metal spudger.

  6. Push the metal rail the print head rests on inwards to remove it from its bearings. Push the metal rail the print head rests on inwards to remove it from its bearings.
    • Push the metal rail the print head rests on inwards to remove it from its bearings.

  7. Remove the belt from the back of the print head using a metal spudger.
    • Remove the belt from the back of the print head using a metal spudger.

  8. Remove the print head from the metal rail by sliding it off the rail.
    • Remove the print head from the metal rail by sliding it off the rail.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Ryan Steakley

Membro da: 23/01/2018

766 Reputazione

5 Guide realizzate

Team

Cal Poly, Team S1-G6, Livingston Winter 2018 Membro di Cal Poly, Team S1-G6, Livingston Winter 2018

CPSU-LIVINGSTON-W18S1G6

4 Membri

5 Guide realizzate

Visualizza Statistiche:

Ultime 24 Ore: 3

Ultimi 7 Giorni: 11

Ultimi 30 Giorni: 36

Tutti i Tempi: 764