Introduzione
The 11.4V battery powering the hp envy is stored inside the bottom part of your laptop. To access the battery the laptop must be taken apart.
Cosa ti serve
-
-
Remove the two no-slip covers on the rear, bottom side using spudger shown in top center of picture.
-
-
-
-
Remove the three 3 mm screws from the battery using Phillips #0 screwdriver.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulla: non ho completato questa guida.
Altre 3 persone hanno completato questa guida.