Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
On the back of the computer, slide the left switch towards the outside of the laptop until you hear a click.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Slide the battery away from the switches until it can be lifted away from the laptop.
-
Lift the battery away from the laptop.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
On the back of the laptop, slide the right switch toward the outside of the laptop until you hear a click.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Slide the back shell of the laptop away from the switches until it can be lifted up.
-
Lift the shell straight up.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using a Phillips #0 bit, unscrew the two screws on opposite corners of the fan.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Pull the fan straight up and to the side slightly.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Disconnect the small electrical connector. Pry the edge up with your finger nails or using a small plastic pry tool.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using a Phillips #0 bit, unscrew the six screws on the heat sink.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Pry the inside edge up, pulling the entire assembly to the inside of the laptop, exposing the processor and graphics processor
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Blow compressed air through the vent from the outside and through the heat sink.
-
Annulla: non ho completato questa guida.
Altre 2 persone hanno completato questa guida.