Aggiusta la tua roba Comunità Store

HP Elitebook 820 G1 Monitor Display Replacement

Introduzione

Displays can get easily damaged either with time, or with any liquids or impacts.

Cosa ti serve

  1. HP Elitebook 820 G1 Monitor Display Replacement, Battery: passo 1, immagine 1 di 1

    • Ensure the laptop is completely powered off and power adapter is unplugged before removing the battery.

    • Turn over laptop so that the bottom is showing.

    • Unlock the latch.

    Traduci

  2. HP Elitebook 820 G1 Monitor Display Replacement: passo 2, immagine 1 di 1

    • Remove the back cover and you will then be able to see the battery.

    Traduci

  3. HP Elitebook 820 G1 Monitor Display Replacement: passo 3, immagine 1 di 1

    • Unlatch the two latches securing the battery in the case.

    Traduci

  4. HP Elitebook 820 G1 Monitor Display Replacement: passo 4, immagine 1 di 1

    • Use a plastic opening tool to lift and remove the battery.

    Traduci

  5. HP Elitebook 820 G1 Monitor Display Replacement, Fan: passo 5, immagine 1 di 1

    • Remove the hard drive by unscrewing the four 8mm screws with the T7 philip's head.

    Traduci

  6. HP Elitebook 820 G1 Monitor Display Replacement: passo 6, immagine 1 di 1

    • Pry off ten rubber paddings on the outer edge of the laptop to reveal the torx screws.

    • Unscrew the ten 8mm torx screws that are under the rubber paddings using the T7 tip torx screwdriver.

    Traduci

  7. HP Elitebook 820 G1 Monitor Display Replacement: passo 7, immagine 1 di 1

    • Remove the two 4mm screws indicated by the M2.5X4 using the J00 tip screwdriver.

    • Remove SD card cap by just sliding out to reveal one screw.

    Traduci

  9. HP Elitebook 820 G1 Monitor Display Replacement: passo 8, immagine 1 di 1

    • Remove the two 3mm screws indicated by the M2.03 using the J00 tip screwdriver.

    • Remove the 4mm SD card screw using the J00 tip.

    Traduci

  10. HP Elitebook 820 G1 Monitor Display Replacement: passo 9, immagine 1 di 1

    • Remove the one 4mm fan screw using the J00 tip screwdriver.

    • Remove screw and metal plate to expose ribbon cable connector.

    Traduci

  11. HP Elitebook 820 G1 Monitor Display Replacement: passo 10, immagine 1 di 1

    • Use an opening tool to pry up the ribbon connector to disconnect.

    Traduci

  12. HP Elitebook 820 G1 Monitor Display Replacement: passo 11, immagine 1 di 1

    • Turn laptop over back to normal position as shown in the image.

    • Use opening tools to pry up keyboard.

    • When prying up keyboard, be sure to start near any corner of the keyboard.

    • There are two ribbon cables that must be disconnected before fully removing keyboard.

    Traduci

  13. HP Elitebook 820 G1 Monitor Display Replacement: passo 12, immagine 1 di 3 HP Elitebook 820 G1 Monitor Display Replacement: passo 12, immagine 2 di 3 HP Elitebook 820 G1 Monitor Display Replacement: passo 12, immagine 3 di 3

    • Carefully lift keyboard on one side to expose the two ribbon cables.

    • Use an opening tool to lift up the locking clip and unplug the two ribbon cables.

    Traduci

  14. HP Elitebook 820 G1 Monitor Display Replacement: passo 13, immagine 1 di 1

    • Remove the two 4mm screws centered notated by the keyboard logo using the J00 tip.

    Traduci

  15. HP Elitebook 820 G1 Monitor Display Replacement: passo 14, immagine 1 di 3 HP Elitebook 820 G1 Monitor Display Replacement: passo 14, immagine 2 di 3 HP Elitebook 820 G1 Monitor Display Replacement: passo 14, immagine 3 di 3

    • Once keyboard has been fully removed, the system case containing the motherboard can be lifted out easily.

    • The display is connected to the shell of the laptop.

    Traduci

  16. HP Elitebook 820 G1 Monitor Display Replacement: passo 15, immagine 1 di 1

    • Unplug fan cable by pulling away from its connector.

    Traduci

  17. HP Elitebook 820 G1 Monitor Display Replacement: passo 16, immagine 1 di 1

    • Unscrew the two 6mm fan screws using the J00 tip.

    • Fan screws are encased in springs and cannot be removed.

    Traduci

  18. HP Elitebook 820 G1 Monitor Display Replacement, Monitor display: passo 17, immagine 1 di 1

    • Retrieve the monitor display connected to the plastic chassis.

    Traduci

  19. HP Elitebook 820 G1 Monitor Display Replacement: passo 18, immagine 1 di 1

    • Unscrew the two 4mm hinge screws using the Philips 00 tip screwdriver.

    Traduci

  20. HP Elitebook 820 G1 Monitor Display Replacement: passo 19, immagine 1 di 1

    • Unhinge the monitor display from the chassis.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 3 altri collaboratori

Alberto Carlos Perez

Membro da: 02/14/18

365 Reputazione

2 Guide realizzate

Distintivi: 8

+5 altri distintivi

Team

USF Tampa, Team S5-G1, Eyestone Spring 2018 Membro di USF Tampa, Team S5-G1, Eyestone Spring 2018

USFT-EYESTONE-S18S5G1

3 Membri

7 Guide realizzate

Un commento

Hello,

I need to replace the inverter as my screen is too much dark.

I cannot see the inverter and even I cannot find any inverter for this model.

Do you know how to access to this inverter? Is it embedded within the screen?

Thanks by advance.

BR

richard P - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 19

Tutti i Tempi: 3,242