Introduzione

The Wifi card can be one of the most important components of your computer. This is what connects the computer to the wireless internet by means of communicating through the router. If in range, they are able to connect to wireless internet if it's not password protected. If it doesn't work, the computer is rendered obsolete. If your computer can't connect to the internet or has trouble with the upload/download speed and you are wishing to replace or upgrade, you have come to the right place!

Parti

Nessuna parte richiesta.

Use a Phillips #1 screwdriver to undo the five screws. The top three screws are 10 mm and the two side screws are 7 mm.
  • Use a Phillips #1 screwdriver to undo the five screws. The top three screws are 10 mm and the two side screws are 7 mm.

  • Unscrew the bottom three screws using the same screwdriver.

  • The bottom Phillips #1 screws don't remove from the back plate, but do need to be unscrewed.

Aggiungi Commento

Turn computer so that the hinged side is facing up.
  • Turn computer so that the hinged side is facing up.

  • Use the plastic opening tool to pry open the back plate.

  • Drag the plastic opening tool along the edge from left to right and use a second opening tool to pry open the top right corner.

  • Repeat the 3rd step for the other side.

  • You should be able to hear a pop when prying open the corners.

Aggiungi Commento

  • Grab the back plate and separate it slowly away from the device.

  • No wiring is connected to the back plate. Separate with caution, as there are electric components on the inside.

Aggiungi Commento

  • Using either the spludger, tweezers or your fingers, remove the wire connectors from the WiFi card by pulling up.

  • The wire connectors should disconnect from the WiFi card with minimal force; Refrain from pulling too hard, as you might damage the WiFi card further.

Aggiungi Commento

  • Remove the single 2mm screw that is holding the WiFi card in place using the Phillips #1 screwdriver.

Aggiungi Commento

  • The WiFi card will pop up. Carefully grasp both sides of the card and pull outwards, away from its dock.

  • The WiFi card should be removed easily with minimal force; Refrain from pulling too hard.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order. Make sure to handle the component with extreme care, as it is delicate and has no protection.

Ryan McMullen

Membro da: 24/04/2018

309 Reputazione

3 Guide realizzate

Team

Cal Poly, Team S25-G13, Maness Spring 2018 Membro di Cal Poly, Team S25-G13, Maness Spring 2018

CPSU-MANESS-S18S25G13

4 Membri

12 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 11

Ultimi 30 Giorni: 40

Tutti i Tempi: 201