Salta al contenuto principale

HP Elite x2 1012 G2 Battery Replacement

Cosa ti serve

  1. HP Elite x2 1012 G2 Battery Replacement, Screen: passo 1, immagine 1 di 1
    • Make sure the device is turned off before starting.

    • Orient the device so the back is facing you, with the kickstand up.

  2. HP Elite x2 1012 G2 Battery Replacement: passo 2, immagine 1 di 3 HP Elite x2 1012 G2 Battery Replacement: passo 2, immagine 2 di 3 HP Elite x2 1012 G2 Battery Replacement: passo 2, immagine 3 di 3
    • Remove the six 3mm Torx T5 screws underneath the kickstand.

  3. HP Elite x2 1012 G2 Battery Replacement: passo 3, immagine 1 di 2 HP Elite x2 1012 G2 Battery Replacement: passo 3, immagine 2 di 2
    • Turn the device over so the screen is facing you.

    • Place a suction cup firmly onto a corner of the screen.

    • Lift up gently until you see the screen separate from the casing.

    • Repeat this process for all four corners.

  4. HP Elite x2 1012 G2 Battery Replacement: passo 4, immagine 1 di 1
    • Lift the screen up and off of the device.

    • Pry each corner up first, otherwise you may damage or crack the screen.

  5. HP Elite x2 1012 G2 Battery Replacement: passo 5, immagine 1 di 3 HP Elite x2 1012 G2 Battery Replacement: passo 5, immagine 2 di 3 HP Elite x2 1012 G2 Battery Replacement: passo 5, immagine 3 di 3
    • Remove the two connectors on the back of the screen by lifting the connector tabs on the motherboard with a plastic opening tool and pulling gently.

  6. HP Elite x2 1012 G2 Battery Replacement: passo 6, immagine 1 di 2 HP Elite x2 1012 G2 Battery Replacement: passo 6, immagine 2 di 2
    • Remove the screen by gently lifting it off of the device.

  7. HP Elite x2 1012 G2 Battery Replacement, Battery: passo 7, immagine 1 di 1
    • Orient the device so that the battery is closest to you.

    • The battery is the large, black rectangle at the bottom of the device.

  8. HP Elite x2 1012 G2 Battery Replacement: passo 8, immagine 1 di 2 HP Elite x2 1012 G2 Battery Replacement: passo 8, immagine 2 di 2
    • Remove all six Phillips 3 mm screws around the battery by rotating in the counterclockwise direction with a Phillips screwdriver.

  9. HP Elite x2 1012 G2 Battery Replacement: passo 9, immagine 1 di 2 HP Elite x2 1012 G2 Battery Replacement: passo 9, immagine 2 di 2
    • Remove the battery's connector by pushing both sides of the tab towards yourself with a plastic opening tool.

  10. HP Elite x2 1012 G2 Battery Replacement: passo 10, immagine 1 di 1
    • Lift the battery out of the device.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 13 persone hanno completato questa guida.

Team

Cal Poly, Team S18-G5, Livingston Spring 2018 Membro di Cal Poly, Team S18-G5, Livingston Spring 2018

CPSU-LIVINGSTON-S18S18G5

4 Membri

13 Guide realizzate

4 Commenti

how do you test the battery? what voltage should it be maintaining?

scott kay - Replica

Bien tout en image

tech25@hotmail.fr - Replica

Hi, after the replacement battery
toch not working, help pls?

Parsa Aghabeikzadeh - Replica

PC not coming on, also not charging.

Abiola - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 21

Ultimi 7 Giorni: 84

Ultimi 30 Giorni: 416

Tutti i Tempi: 21,710