Salta al contenuto principale

HP Elite X2 G4 Display Assembly Replacement

Cosa ti serve

  1. HP Elite X2 G4 Display Assembly Replacement, Display Assembly: passo 1, immagine 1 di 1
    • Open the kickstand.

    • Remove the four 3 mm T5 Torx-head screws that secure the display assembly.

  2. HP Elite X2 G4 Display Assembly Replacement: passo 2, immagine 1 di 1
    • Use a suction sup to carefully detach the display assembly in the following order: top-right corner, top-left corner, bottom-right corner and bottom-left corner.

  3. HP Elite X2 G4 Display Assembly Replacement: passo 3, immagine 1 di 1
    • Slowly lift the display panel until you have access to the battery connector on the motherboard (approx. 90 degrees).

  4. HP Elite X2 G4 Display Assembly Replacement: passo 4, immagine 1 di 1
    • Disconnect the battery cable from its motherboard connector.

    • Remove the tape that covers the touchscreen and display panel ZIF connectors.

  5. HP Elite X2 G4 Display Assembly Replacement: passo 5, immagine 1 di 1
    • Disconnect the touchscreen ribbon cable from the motherboard.

    • Remove the display panel assembly.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Goncalo Felix

Membro da: 10/25/22

325 Reputazione

3 Guide realizzate

Team

Un commento

Boa tarde Gonçalo.

Sabe dizer-me onde posso comprar um ecrã original para o meu HP Elite X2 G4?

Obrigado

Pedro Santos

Pedro_Neno - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 3

Ultimi 7 Giorni: 8

Ultimi 30 Giorni: 37

Tutti i Tempi: 546