Introduzione

The panel is what holds the screen in place. Before removing the panel make sure the printer is unplugged.

Parti

Nessuna parte richiesta.

  1. Lift up printer screen.
    • Lift up printer screen.

  2. Spedizione gratuita per tutti gli ordini superiori a 100 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio
  3. Use the Metal Spudger from the IFIXIT Toolkit to pry the left corner of the front panel. Slowly pry the front panel by sliding the Metal Spudger along the border of the front panel. Slowly pry the front panel by sliding the Metal Spudger along the border of the front panel.
    • Use the Metal Spudger from the IFIXIT Toolkit to pry the left corner of the front panel.

    • Slowly pry the front panel by sliding the Metal Spudger along the border of the front panel.

  4. Remove the front panel by lifting each corner up. Replace the front panel.
    • Remove the front panel by lifting each corner up.

    • Replace the front panel.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Elizabeth Surface

Membro da: 26/08/2015

1.386 Reputazione

9 Guide realizzate

Team

USF Tampa, Team 4-6, Meier Fall 2015 Membro di USF Tampa, Team 4-6, Meier Fall 2015

USFT-MEIER-F15S4G6

4 Membri

9 Guide realizzate

My HP Envy 5530 had a screw hidden beneath the label on the right side of the front panel. I used a knife to lift the label to access the screw.

rndymike - Replica

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 6

Ultimi 30 Giorni: 25

Tutti i Tempi: 274