Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.
Introduzione
If it is apparent that there are problems regarding the paper being fed through the printer, replacing the paper roller motor is a possible solution. The paper roller motor controls the paper rollers ability to pull paper into the printer and across the ink cartridges for proper printing.
Cosa ti serve
-
-
Open the front access panel by placing your finger in the front slot and pulling gently.
-
-
-
Open the protective lid that is covering the glass. Press gently against the base of the panel to remove the lid from the rest of the printer.
-
-
-
-
Detach the white ribbon cable.
-
Remove the two 9mm Torx screws on either side of the white bracket.
-
To reassemble your device, with the addition of a new motor, follow these instructions in reverse order.
To reassemble your device, with the addition of a new motor, follow these instructions in reverse order.
Annulla: non ho completato questa guida.
Altre 7 persone hanno completato questa guida.