Introduzione
How to dismantle HP Deskjet 930c printer to reach and clean waste ink reservoir and pad.
Cosa ti serve
-
-
Carefully pry off the button board cover with a flat-head screwdriver.
-
Unplug and remove the button board.
-
Remove two screws that hold the printer's top piece in place with a TR8 Torx Security screwdriver.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulla: non ho completato questa guida.
Altre 14 persone hanno completato questa guida.
9 Commenti
Thanks so much, I was able to fix my bad paper feed jam on my Deskjet 952C using your disassembly instructions. Apparently you can take apart the 930C 932C 950C and 952C using similar methods.
I have no idea. I don’t have a HP deskjet 9300 printer.
Many thanks for your instruction, Bernard. I was able to clean my DeskJet 970 cxi, because the waste ink leaked off the reservoir, as I transported the printer upside down :-( I’ve only got two additions, that I commented within the steps.