Aggiusta la tua roba Comunità Store

HP Compaq 2510p Power/audio bar Replacement

Introduzione

This guide will show step-by-step instruction depicting the replacement of your laptops power/audio bar.

Cosa ti serve

  1. HP Compaq 2510p Power/audio bar Replacement, Power/audio bar: passo 1, immagine 1 di 1

    • Locate the 4 screws in the four corners of the laptop screen.

    • The screws may be hidden underneath a small rubber pad.

    • Be sure to ground yourself and tools before working near electronics.

    Traduci

  2. HP Compaq 2510p Power/audio bar Replacement: passo 2, immagine 1 di 1

    • Use a Flathead screwdriver to remove the 4 rubber covers over the 4 screws referenced in step 1.

    Traduci

  3. HP Compaq 2510p Power/audio bar Replacement: passo 3, immagine 1 di 1

    • Once the rubber has been removed a screw will be revealed. Remove each of the four screws with your Philips head screwdriver.

    Traduci

  4. HP Compaq 2510p Power/audio bar Replacement: passo 4, immagine 1 di 1

    • Insert your spudger along the top of the screen, separating the plastic cover and the screen

    Traduci

  6. HP Compaq 2510p Power/audio bar Replacement: passo 5, immagine 1 di 1

    • Continue running your Flathead along the top of the screen until the top is completely separated.

    Traduci

  7. HP Compaq 2510p Power/audio bar Replacement: passo 6, immagine 1 di 2 HP Compaq 2510p Power/audio bar Replacement: passo 6, immagine 2 di 2

    • Pull the plastic covering of the screen towards the keyboard, exposing the inner workings of the screen.

    Traduci

  8. HP Compaq 2510p Power/audio bar Replacement: passo 7, immagine 1 di 1

    • Locate the hinges at the bottom left, and right of the screen

    Traduci

  9. HP Compaq 2510p Power/audio bar Replacement: passo 8, immagine 1 di 2 HP Compaq 2510p Power/audio bar Replacement: passo 8, immagine 2 di 2

    • Separate the Power/Audio bar from the hinge by gently pulling.

    Traduci

  10. HP Compaq 2510p Power/audio bar Replacement: passo 9, immagine 1 di 1

    • Flip the Power/Audio bar over exposing the ribbon wire and its connection to the Power/Audio bar.

    Traduci

  11. HP Compaq 2510p Power/audio bar Replacement: passo 10, immagine 1 di 1

    • Separate the ribbon wire by gently pulling the wire from its socket.

    • The wire will be separated and the bar is free.

    • Be gentle as you pull.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Autore

con 2 altri collaboratori

Derek Kohansky

Membro da: 10/26/16

297 Reputazione

2 Guide realizzate

Distintivi: 6

+3 altri distintivi

Team

UMass Dartmouth, Team 3-8, Isaacson Fall 2016 Membro di UMass Dartmouth, Team 3-8, Isaacson Fall 2016

UMASSD-ISAACSON-F16S3G8

3 Membri

5 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 2

Tutti i Tempi: 365