Salta al contenuto principale

HP Compaq 2510p Bluetooth Adapter Replacement

Cosa ti serve

  1. HP Compaq 2510p Bluetooth Adapter Replacement, Bluetooth Adapter: passo 1, immagine 1 di 1
    • Place the laptop upside down, with the battery facing away from you. Towards the bottom-middle of the laptop, you should see a small panel with a Bluetooth symbol.

  2. HP Compaq 2510p Bluetooth Adapter Replacement: passo 2, immagine 1 di 1
    • There is 1 screw on the panel you located in step one. Use your Philips head screwdriver to remove the single screw.

  3. HP Compaq 2510p Bluetooth Adapter Replacement: passo 3, immagine 1 di 1
    • Remove the Bluetooth panel by pulling it with your finger.

    • Pull gently as there is a wire connecting the laptop and the adapter.

  4. HP Compaq 2510p Bluetooth Adapter Replacement: passo 4, immagine 1 di 1
    • Pull the adapter to the left exposing its underside. Locate and remove its only screw using your Phillip's head screwdriver.

  5. HP Compaq 2510p Bluetooth Adapter Replacement: passo 5, immagine 1 di 1
    • Separate the Bluetooth adapter by pulling it from its casing.

  6. HP Compaq 2510p Bluetooth Adapter Replacement: passo 6, immagine 1 di 1
    • Remove the adapter by pulling on the base of the connecting wires and the adapter, in opposite directions.

    • Use moderate force.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 3 persone hanno completato questa guida.

Team

UMass Dartmouth, Team 3-8, Isaacson Fall 2016 Membro di UMass Dartmouth, Team 3-8, Isaacson Fall 2016

UMASSD-ISAACSON-F16S3G8

3 Membri

5 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 394