Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

HP Chromebook 11 G4 LCD Replacement

Scritto Da: Jonah Silva (e 3 altri collaboratori)
  • Commenti: 3
  • Preferiti: 0
  • Completamenti: 12

Difficoltà

Moderato

Passi

7

Tempo Necessario

Suggerisci un tempo??

Sezioni

1

Contrassegni

1

Missing Details

Dettagli Mancanti

Alcuni dettagli di questa guida sono mancanti. Aiuta gli utenti aggiungendo strumenti, livello di difficoltà o tempo di esecuzione.

Introduzione

Cracked or glitching screens are common for all laptops. This guide will show you how to remove and replace a defective LCD.

  1. Open the laptop. With your the plastic spudger or your fingers, gently peel off the two thin adhesive layers at left and right bottom edges of the screen. Do not pry up the plastic bezel (monitor frame), just the adhesive layer.

    • Open the laptop.

    • With your the plastic spudger or your fingers, gently peel off the two thin adhesive layers at left and right bottom edges of the screen.

    • Do not pry up the plastic bezel (monitor frame), just the adhesive layer.

    • If the adhesive layer isn't coming off, use a metal spudger.

    Traduci

  2. Remove the two 3 mm Phillips #0 screws located underneath the adhesive layers that were removed in the previous step Remove the two 3 mm Phillips #0 screws located underneath the adhesive layers that were removed in the previous step

    • Remove the two 3 mm Phillips #0 screws located underneath the adhesive layers that were removed in the previous step

    Traduci

  3. Gently pry up the plastic bezel with the small, narrow end of the metal spudger. Insert the long, flat end of the metal spudger into the gap. Slide the metal spudger along the edge to disconnect the bezel from the laptop

    • Gently pry up the plastic bezel with the small, narrow end of the metal spudger.

    • Insert the long, flat end of the metal spudger into the gap.

    • Slide the metal spudger along the edge to disconnect the bezel from the laptop

    • You should hear popping sounds as you slide the spudger along the edge.

    • If the spudger gets stuck while sliding, use some extra force.

    Traduci

  4. Kit per Nintendo Switch

    Una soluzione rapida per tornare in gioco

    Acquista Kit per Switch

    Kit per Nintendo Switch

    Una soluzione rapida per tornare in gioco

    Acquista Kit per Switch

  5. Tilt the laptop screen as far back as possible Hold the bezel with both hands and twist up and towards you to disconnect the bottom edge of the bezel from the laptop.

    • Tilt the laptop screen as far back as possible

    • Hold the bezel with both hands and twist up and towards you to disconnect the bottom edge of the bezel from the laptop.

    • You may have to use extra force for this step

    Traduci

  6. Remove the four silver 4 mm Phillips #0 screws at the bottom of the LCD. Remove the four black 3 mm Phillips #00 screws along the perimeter of the LCD. Remove the four black 3 mm Phillips #00 screws along the perimeter of the LCD.

    • Remove the four silver 4 mm Phillips #0 screws at the bottom of the LCD.

    • Remove the four black 3 mm Phillips #00 screws along the perimeter of the LCD.

    Traduci

  7. Lift the LCD off its mount and gently lay it facedown on the keyboard. Lift the LCD off its mount and gently lay it facedown on the keyboard.

    • Lift the LCD off its mount and gently lay it facedown on the keyboard.

    Traduci

  8. Peel off the clear sticker covering the display cable at the base of the LCD. Gently pull the display cable from the connector. Gently pull the display cable from the connector.

    • Peel off the clear sticker covering the display cable at the base of the LCD.

    • Gently pull the display cable from the connector.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 12 persone hanno completato questa guida.

Autore

con 3 altri collaboratori

Jonah Silva

Membro da: 26/04/2017

623 Reputazione

1 Guida realizzata

Distintivi: 9

+6 altri distintivi

Team

Cal Poly, Team S23-G5, Livingston Spring 2017 Membro di Cal Poly, Team S23-G5, Livingston Spring 2017

CPSU-LIVINGSTON-S17S23G5

3 Membri

5 Guide realizzate

3 Commenti

Aggiungi un commento

Thanks for the great guidance. Easy as pie!

lcowsert - Replica

i need to replace the top cover of this Laptop HP Chromebook 11-2201NA Can you help

grahamcoles - Replica

I did it! Thank you for terrific instructions.

Krenee - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 22

Ultimi 30 Giorni: 86

Tutti i Tempi: 4,420