Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Introduzione

This guide walks through replacing a faulty battery. It requires removing the keyboard mount. Afterwards, it is relatively simple and requires only a Phillips head screwdriver to finish removal.

  1. Flip the laptop upside down so that the lid lies flat on the table. Remove the nine 6mm Phillips #00 screws that line the border.
    • Flip the laptop upside down so that the lid lies flat on the table.

    • Remove the nine 6mm Phillips #00 screws that line the border.

  2. Remove the two rubber feet closest to the hinge using tweezers. Remove the two 6mm Phillips #00 screws revealed under these rubber feet.
    • Remove the two rubber feet closest to the hinge using tweezers.

    • Remove the two 6mm Phillips #00 screws revealed under these rubber feet.

    • The rubber feet may tear while removal; preventing this can be difficult, but it won’t harm the laptop. If desired, replace these rubber feet during reassembly.

  3. Flip the laptop so it is in the upright position.
    • Flip the laptop so it is in the upright position.

    • Open the lid.

    • Unsnap the keyboard mount along the border of the laptop using a plastic opening tool.

    • This may require more force than expected. Hearing loud clicks as the plastic opening tool slides along the seam is normal.

  4. Kit per Nintendo Switch

    Una soluzione rapida per tornare in gioco

    Acquista Kit per Switch

    Kit per Nintendo Switch

    Una soluzione rapida per tornare in gioco

    Acquista Kit per Switch
  5. Tilt the keyboard mount up. Use a spudger to flip up the two ZIF connector retaining flaps for the ribbon cables that connect the keyboard mount to the motherboard. Gently remove both ribbon cables.
    • Tilt the keyboard mount up.

    • Use a spudger to flip up the two ZIF connector retaining flaps for the ribbon cables that connect the keyboard mount to the motherboard.

    • Gently remove both ribbon cables.

  6. Lift the keyboard mount out of the laptop.
    • Lift the keyboard mount out of the laptop.

  7. Gently remove the battery’s rainbow-colored bundled cable from the motherboard.
    • Gently remove the battery’s rainbow-colored bundled cable from the motherboard.

  8. Remove the six 4 mm Phillips #00 screws located along the perimeter of the battery. Remove the six 4 mm Phillips #00 screws located along the perimeter of the battery.
    • Remove the six 4 mm Phillips #00 screws located along the perimeter of the battery.

  9. Lift out the battery.
    • Lift out the battery.

    • The laptop may tip backwards onto its lid due to uneven weight distribution.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 5 persone hanno completato questa guida.

Rahul Goyal

Membro da: 26/04/2017

1.345 Reputazione

10 Guide realizzate

Team

Cal Poly, Team S23-G3, Livingston Spring 2017 Membro di Cal Poly, Team S23-G3, Livingston Spring 2017

CPSU-LIVINGSTON-S17S23G3

4 Membri

12 Guide realizzate

Can the HP Chromebook 11 G3 be operated from the power adapter after the battery has been removed?

Andrew Logan - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 4

Ultimi 7 Giorni: 22

Ultimi 30 Giorni: 59

Tutti i Tempi: 2,069