Aggiusta la tua roba Comunità Store

HP Chromebook 11 G3 Screen Bezel Replacement

Solo Prerequisita
Questa guida è destinata a essere usata solo come prerequisito per altre guide. Da sola è incompleta.

Introduzione

This guide walks through removing the display assembly and opening the screen bezel. It requires removing the keyboard mount. It requires using a Phillips head screwdriver, a plastic opening tool, and a spudger to finish removal.

Cosa ti serve

  1. HP Chromebook 11 G3 Screen Bezel Replacement, Keyboard Mount: passo 1, immagine 1 di 2 HP Chromebook 11 G3 Screen Bezel Replacement, Keyboard Mount: passo 1, immagine 2 di 2

    • Flip the laptop upside down so that the lid lies flat on the table.

    • Remove the nine 6mm Phillips #00 screws that line the border.

    Traduci

  2. HP Chromebook 11 G3 Screen Bezel Replacement: passo 2, immagine 1 di 2 HP Chromebook 11 G3 Screen Bezel Replacement: passo 2, immagine 2 di 2

    • Remove the two rubber feet closest to the hinge using tweezers.

    • Remove the two 6mm Phillips #00 screws revealed under these rubber feet.

    • The rubber feet may tear while removal; preventing this can be difficult, but it won’t harm the laptop. If desired, replace these rubber feet during reassembly.

    Traduci

  3. HP Chromebook 11 G3 Screen Bezel Replacement: passo 3, immagine 1 di 1

    • Flip the laptop so it is in the upright position.

    • Open the lid.

    • Unsnap the keyboard mount along the border of the laptop using a plastic opening tool.

    • This may require more force than expected. Hearing loud clicks as the plastic opening tool slides along the seam is normal.

    Traduci

  4. HP Chromebook 11 G3 Screen Bezel Replacement: passo 4, immagine 1 di 3 HP Chromebook 11 G3 Screen Bezel Replacement: passo 4, immagine 2 di 3 HP Chromebook 11 G3 Screen Bezel Replacement: passo 4, immagine 3 di 3

    • Tilt the keyboard mount up.

    • Use a spudger to flip up the two ZIF connector retaining flaps for the ribbon cables that connect the keyboard mount to the motherboard.

    • Gently remove both ribbon cables.

    Traduci

  6. HP Chromebook 11 G3 Screen Bezel Replacement: passo 5, immagine 1 di 1

    • Lift the keyboard mount out of the laptop.

    Traduci

  7. HP Chromebook 11 G3 Screen Bezel Replacement, Display Assembly: passo 6, immagine 1 di 1

    • Gently tug on the black and white wires connected to the Wi-Fi module to disconnect them.

    Traduci

  8. HP Chromebook 11 G3 Screen Bezel Replacement: passo 7, immagine 1 di 2 HP Chromebook 11 G3 Screen Bezel Replacement: passo 7, immagine 2 di 2

    • Using a spudger, lift the ZIF retaining flap that secures the display’s ribbon cable to the motherboard.

    • Gently pull the ribbon cable out of its socket.

    Traduci

  9. HP Chromebook 11 G3 Screen Bezel Replacement: passo 8, immagine 1 di 1

    • Free the wire from the casing.

    Traduci

  10. HP Chromebook 11 G3 Screen Bezel Replacement: passo 9, immagine 1 di 1

    • Remove the two 6mm Phillips #00 screws located near the upper left and right corners of the hinge mounts.

    • Hold the lid so that it is folded slightly inwards while removing the screws so that the lid doesn’t fall.

    Traduci

  11. HP Chromebook 11 G3 Screen Bezel Replacement: passo 10, immagine 1 di 1

    • Rotate the lid to a 90-degree angle with the table.

    • Shimmy the lid out of the laptop.

    Traduci

  12. HP Chromebook 11 G3 Screen Bezel Replacement, Screen Bezel: passo 11, immagine 1 di 3 HP Chromebook 11 G3 Screen Bezel Replacement, Screen Bezel: passo 11, immagine 2 di 3 HP Chromebook 11 G3 Screen Bezel Replacement, Screen Bezel: passo 11, immagine 3 di 3

    • Use the plastic opening tool to pry the left and right side of the top of the lid, and proceed inwards from the sides.

    • Do not attempt to remove the entire frame; this isn't necessary for removing the camera.

    • Do not pry at the center of the lid; this may damage the camera inside.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Rahul Goyal

Membro da: 04/26/17

1.369 Reputazione

10 Guide realizzate

Distintivi: 11

+8 altri distintivi

Team

Cal Poly, Team S23-G3, Livingston Spring 2017 Membro di Cal Poly, Team S23-G3, Livingston Spring 2017

CPSU-LIVINGSTON-S17S23G3

4 Membri

12 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 10