Aggiusta la tua roba ComunitĂ  Store

HP 15-ay103dx Motherboard Replacement

Cosa ti serve

  1. HP 15-ay103dx Motherboard Replacement, Battery: passo 1, immagine 1 di 1

    • Slide the two battery lock latches on the back of the device to the “unlock” position.

    Modifica

  2. HP 15-ay103dx Motherboard Replacement: passo 2, immagine 1 di 1

    • Lift the battery upward to remove it from the device.

    Modifica

  3. HP 15-ay103dx Motherboard Replacement, Back Panel: passo 3, immagine 1 di 1

    • Using the PH1 phillips-head screwdriver, remove all the 5/16 in. screws from the back of the device.

    • There should be 10 in total, be sure to keep them together!

    Modifica

  4. HP 15-ay103dx Motherboard Replacement: passo 4, immagine 1 di 1

    • Locate the optical disc drive and remove it from the device by sliding it straight of the device.

    Modifica

  6. HP 15-ay103dx Motherboard Replacement: passo 5, immagine 1 di 2 HP 15-ay103dx Motherboard Replacement: passo 5, immagine 2 di 2

    • Covering the hinges of the device are rubber bumpers secured to the device using adhesive. Remove them carefully.

    • Place the adhesive side up as you will need to place them back after your replacement is complete.

    Modifica

  7. HP 15-ay103dx Motherboard Replacement: passo 6, immagine 1 di 2 HP 15-ay103dx Motherboard Replacement: passo 6, immagine 2 di 2

    • In the same spot you’ve just removed the bumpers from, you will find two 5/16 in. screws. Using the same Phillips-head screwdriver used in step 2, remove the screws

    • Be sure to keep the screws together!

    Modifica

  8. HP 15-ay103dx Motherboard Replacement: passo 7, immagine 1 di 1

    • Carefully remove the back panel from the device.

    • If you are unable to do this with your hands, you can use a thin prying tool of your choice to make it easier!

    Modifica

  9. HP 15-ay103dx Motherboard Replacement, Motherboard: passo 8, immagine 1 di 3 HP 15-ay103dx Motherboard Replacement, Motherboard: passo 8, immagine 2 di 3 HP 15-ay103dx Motherboard Replacement, Motherboard: passo 8, immagine 3 di 3

    • Disconnect the wires around the motherboard securing it to the device.

    • To do this, flip the black "switches" securing the wires into place upwards.

    Modifica

  10. HP 15-ay103dx Motherboard Replacement: passo 9, immagine 1 di 1

    • Remove the six 5/16 in. screws holding the motherboard onto the device using the P1 philips-head screwdriver.

    • Be sure to keep them together!

    Modifica

  11. HP 15-ay103dx Motherboard Replacement: passo 10, immagine 1 di 3 HP 15-ay103dx Motherboard Replacement: passo 10, immagine 2 di 3 HP 15-ay103dx Motherboard Replacement: passo 10, immagine 3 di 3

    • Disconnect the wire securing the whole motherboard located at the top to the motherboard.

    • This is possible with your fingers, but is easier to do using an iFixit opening tool.

    Modifica

  12. HP 15-ay103dx Motherboard Replacement: passo 11, immagine 1 di 1

    • Carefully lift the motherboard to remove it from the device.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 7

Tutti i Tempi: 1,571