Aggiusta la tua roba Comunità Store

HP 10 2101 Back Panel Replacement

Introduzione

The back panel is attached to the rest of the device by internal clips. In this guide you will separate these clips with the smallest plastic opening tool. This guide requires prying plastic pieces apart, please be gentle and use plastic tools.

Cosa ti serve

  1. HP 10 2101 Back Panel Replacement, Back Panel: passo 1, immagine 1 di 1

    • Identify the SD card port.

    Modifica

  2. HP 10 2101 Back Panel Replacement: passo 2, immagine 1 di 1

    • Insert the smallest plastic opening tool into the SD card port. Gently pry until the back panel separates from the screen panel.

    • Do not insert opening tool too far. Avoid making contact with the metal inside the port.

    Modifica

  4. HP 10 2101 Back Panel Replacement: passo 3, immagine 1 di 1

    • Slide the opening tool along the seam between the back panel and the screen panel, prying the panels apart as you move around the edges.

    Modifica

  5. HP 10 2101 Back Panel Replacement: passo 4, immagine 1 di 1

    • Separate the back panel from the rest of the device.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 6

Tutti i Tempi: 381