Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Turn the adjusting knob to the right until the cloth clamp is extended as far as it can go.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Located on the bottom, pull the lip of the retainer plate away from The Buttonholer, and then open the plate.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Since the clamp is extended as far as it can go, the template should come out easily.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
4 additional templates are included with The Buttonholer. Each template creates a different size button hole.
-
If you are unsure which template is right for your project, check the back of each template for the diameter of the holes that they make.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Place the template into The Buttonholer, and then close the retainer plate.
-
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.