Salta al contenuto principale

Introduzione

Adjusting the governor helps maintain a steady engine speed no matter the terrain and other conditions that could effect the engine workload. While the manufacturer highly recommends against this, it may be necessary to keep your engine running well.

Parti

Nessuna parte specificata.

  1. Before starting, make sure the engine isn't running and is not hot. Using needle-nose pliers, carefully unhook the spring from the end opposite the air filter. Using needle-nose pliers, carefully unhook the spring from the end opposite the air filter.
    • Before starting, make sure the engine isn't running and is not hot.

    • Using needle-nose pliers, carefully unhook the spring from the end opposite the air filter.

  2. Kit di riparazione per Android

    A new screen or battery is one kit away.

    Acquista ora

    Kit di riparazione per Android

    A new screen or battery is one kit away.

    Acquista ora
  3. Use the needle-nose pliers to either lengthen or shorten the hook at the end of the spring.
    • Use the needle-nose pliers to either lengthen or shorten the hook at the end of the spring.

    • If your engine is stalling or refusing to start, try shortening the spring. This will enable more fuel to reach to engine at idle. If the engine is bogged down when running and you hear liquids splashing, try lengthening the spring.

  4. Carefully re-hook the spring on the arm it was disconnected from.
    • Carefully re-hook the spring on the arm it was disconnected from.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Aaron Correya

Membro da: 19/04/2018

239 Reputazione

2 Guide realizzate

Team

Cal Poly, Team S25-G15, Maness Spring 2018 Membro di Cal Poly, Team S25-G15, Maness Spring 2018

CPSU-MANESS-S18S25G15

4 Membri

7 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 16

Tutti i Tempi: 230