Salta al contenuto principale

Introduzione

A guide to replace the speaker for Google Home Mini.

  1. Place device on a flat surface.
    • Place device on a flat surface.

  2. Remove the rubber bottom as per the Google Home Mini teardown guide.
  3. Remove the lower half of the device.
    • Remove the lower half of the device.

    • Be careful as a black ribbon cable connects the two halves together.

  4. Kit di riparazione batterie iPhone

    Solo $29.99

    Buy Now

    Kit di riparazione batterie iPhone

    Solo $29.99

    Buy Now
  5. Using a pair of tweezers, unlatch the  Zero Insertion Force (ZIF) fastener that connects the ribbon cable to the board.
    • Using a pair of tweezers, unlatch the Zero Insertion Force (ZIF) fastener that connects the ribbon cable to the board.

    • Flip up and push the ZIF fastener towards outside of the lower case to loosen it.

  6. Pull the ribbon cable off.
    • Pull the ribbon cable off.

  7. Remove the four 7.8mm T8 Torx screws.
    • Remove the four 7.8mm T8 Torx screws.

  8. The speaker will still be connected to the device. Using your fingers, disconnect the wires. Using your fingers, disconnect the wires.
    • The speaker will still be connected to the device.

    • Using your fingers, disconnect the wires.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 3 persone hanno completato questa guida.

Mia Sulaiman

Membro da: 21/05/2018

597 Reputazione

3 Guide realizzate

Team

IUPUI, Team S1-G4, Harley Spring 2018 Membro di IUPUI, Team S1-G4, Harley Spring 2018

IUPUI-HARLEY-S18S1G4

7 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 6

Ultimi 7 Giorni: 34

Ultimi 30 Giorni: 129

Tutti i Tempi: 1,507