GoPro Karma Landing Gear Replacement

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Introduzione

Use this guide to remove and replace your broken landing gear. It will show you how to remove the entire assembly safely for replacement. This may be needed if broken on a rough landing.

Cosa ti serve

Passo 1 Battery

GoPro Karma Landing Gear Replacement, Battery: passo 1, immagine 1 di 1

Hook your fingers on the tab and pull out the battery.

Traduci

Passo 2 Stabilizer

GoPro Karma Landing Gear Replacement, Stabilizer: passo 2, immagine 1 di 3

GoPro Karma Landing Gear Replacement, Stabilizer: passo 2, immagine 2 di 3

GoPro Karma Landing Gear Replacement, Stabilizer: passo 2, immagine 3 di 3

Locate stabilizer collar’s unlock and lock symbols. Twist the collar counterclockwise to unlock the stabilizer from GoPro Karma body.
Place the GoPro Karma on a stable surface with the legs folded in and the stabilizer facing towards yourself.

Traduci

Passo 3

Remove the stabilizer by pulling the entire stabilizer out of the drone body.

Traduci

Passo 4 Landing Gear

GoPro Karma Landing Gear Replacement, Landing Gear: passo 4, immagine 1 di 1

Flip the drone upside down with the landing gear out.
Remove the four 1.2 cm long hex screws with a Hex 2.0 screwdriver in the four corners of the landing gear

Traduci

Passo 5

Push with your thumb and pull up with your fingers to remove the landing gear.
Caution: The landing gear is connected by a thin cable so do not pull too far away.

Traduci