Introduzione

Replacing the harness for the GoPro camera is fairly easy. We will tell you how to remove the stabilizer which holds the harness, how to remove camera from the harness, and how to replace the harness itself.

Parti

Nessuna parte richiesta.

Locate stabilizer collar’s unlock and lock symbols. Twist the collar counterclockwise to unlock the stabilizer from GoPro Karma body.
  • Locate stabilizer collar’s unlock and lock symbols. Twist the collar counterclockwise to unlock the stabilizer from GoPro Karma body.

  • Place the GoPro Karma on a stable surface with the legs folded in and the stabilizer facing towards yourself.

Aggiungi Commento

Remove the stabilizer by pulling the entire stabilizer out of the drone body.
  • Remove the stabilizer by pulling the entire stabilizer out of the drone body.

Aggiungi Commento

  • Place finger on the tab to open the harness and remove the camera.

  • Be sure to pull the camera straight out lest you damage the connectors.

Aggiungi Commento

  • Using a Hex 2.0mm screwdriver, remove the two 12 mm hex screws closest to the harness.

Aggiungi Commento

  • Pull the harness off of the stabilizer.

  • Be sure to pull the harness straight off lest you damage the connector.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Max Verspieren

Membro da: 19/04/2018

97 Reputazione

1 Guida realizzata

Team

Cal Poly, Team S25-G14, Maness Spring 2018 Membro di Cal Poly, Team S25-G14, Maness Spring 2018

CPSU-MANESS-S18S25G14

4 Membri

6 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 18

Tutti i Tempi: 137