Introduzione

There are many benefits to repairing your own watch such as cheaper than replacing the whole watch or taking it to a jeweler, and maintaining the sentimental value when repairing it yourself. No prior technical experience is required, just a little patience and literacy!

  1. Place the watch in the band holder.
    • Place the watch in the band holder.

    • Make sure to align the band pin directly over one of the holes.

  2. Use your pin push and rubber mallet to knock it through.
    • Use your pin push and rubber mallet to knock it through.

  3. Spedizione gratuita per tutti gli ordini superiori a 100 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio
  4. Use your pliers to pull the pin the rest of the way through.
    • Use your pliers to pull the pin the rest of the way through.

  5. Repeat steps 1-3 on the other side to fully release the old clasp from the watch. Repeat steps 1-3 on the other side to fully release the old clasp from the watch. Repeat steps 1-3 on the other side to fully release the old clasp from the watch.
    • Repeat steps 1-3 on the other side to fully release the old clasp from the watch.

  6. Slide the pin back in halfway, then reattach both sides of your new clasp to your watch.
    • Slide the pin back in halfway, then reattach both sides of your new clasp to your watch.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Caleb Shuford

Membro da: 22/02/2018

121 Reputazione

1 Guida realizzata

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 15

Tutti i Tempi: 199